Skip to main content

Breeze Integration: Radon Testing Reports in Spectora

How the Breeze radon testing integration sends inspection info to Breeze and automatically returns completed radon reports into Spectora.

Written by Shannon Lewis

Breeze is a radon testing platform. This integration is optional and requires a Breeze account.

How it works - Setting up the integration

  1. Go to your Integrations page in Spectora.

  2. Find Breeze and select Connect.

  3. You'll be redirected to Breeze's login page — log in to your Breeze account.

  4. Review what information the integration will access, then select Authorize.

  5. Once authorized, the integration is connected.

When you create an inspection, Spectora checks whether it includes a service category type that matches Radon. If it does, that inspection's data is sent over to Breeze and appears under Breeze's appointments section.

Once the radon test is completed and the report generated on Breeze's side, Breeze automatically sends the completed report back into Spectora, where it appears under the Reports section on that inspection. Once you publish the inspection, the report is also available to your client through the client portal.

Note: This integration is built by Breeze, not directly by Spectora.


Why use this integration

This integration reduces duplicate data entry across two systems and removes the manual step of downloading a report from Breeze or email and uploading it into Spectora for every radon testing transaction. It reduces human error when managing externally produced reports and bringing them back into Spectora.


Service category types

For an inspection's radon data to be sent to Breeze, the inspection must include a service category set to the Radon service category type. Breeze matches on the service category type, not on the service category's display name — so if you've renamed your radon service category, double-check that its underlying type is still set to Radon in your service category settings in Spectora.


Steps to enable

This integration is optional. To enable this integration in your Spectora account:

  1. Click on your inspector name in the top right, then select Integrations.

  2. Click Connect on the Breeze card.

  3. You will need an account with Breeze to complete the integration.


FAQs: Your clients' information and privacy

What does the integration share with Breeze?

Nothing is shared until you connect the app and book an inspection that includes a radon service. When that happens, Spectora sends Breeze the inspection details and the client and agent contact information on that inspection: name, phone, email, and property address. It is not a feed of your contacts. It is the same order information Breeze receives when you place the order with them directly.

Why does Breeze need this information?

Breeze's order system requires the property owner's name, phone number, at least one email, the property address, and the inspection date to create an appointment and issue the report.

Why does the authorization screen say contact information "may" be visible?

Contact information is only sent if it was entered on the inspection when the order was created. If the client or agent is on the inspection, assume it is sent.

Can Breeze contact or market to my clients?

No. Our agreement with Breeze limits them to using this information to fulfill the test for that specific inspection. It prohibits marketing, solicitation, selling or sharing the data, and using it to build other products. Any outreach to a homeowner using information from the integration requires that homeowner's consent under TCPA and CAN-SPAM, with records we can audit. Misuse is grounds for immediate termination, and Breeze is required to destroy the data when the agreement ends. Spectora, not Breeze, controls which fields the integration sends. Breeze's privacy policy and terms are linked on the Learn More page for the app and apply whether or not you use the integration.

Can I limit what is shared?

Only inspections that include a service with the Radon service category type are sent to Breeze. Field-level controls are not available yet. If you do not want client contact information shared, do not connect the integration and keep ordering from Breeze directly, exactly as you do today.

Can I turn it off?

Yes. Disconnect the app on your Integrations page, and Breeze no longer has access to your Spectora data.

Is this related to Fixle?

No. Breeze is not associated with Fixle. Fixle is an opt-in service where homeowners can choose offers like a home warranty, home security, or insurance after their inspection. The inspector decides whether to turn it on. If it is on, the homeowner sees those offers in the Special Offers section of their client portal, and no client data is shared with a Fixle partner unless the homeowner opts in. The Breeze integration is different again. It is not a consumer offer at all. Breeze receives order details for a test you ordered, uses them to run that test and return the report, and is contractually barred from using them for anything else.


If you have any questions or feedback, write into our chat bubble or email support@spectora.com!

Did this answer your question?