All Collections
Spectora Advanced
Pay Splits
Spectora Advanced: PaySplits
Spectora Advanced: PaySplits

How to automate the accounting of how much each of your inspectors should earn for each of the services your company provides.

Josh Koontz avatar
Written by Josh Koontz
Updated over a week ago

As part of Spectora Advanced, Pay Splits allows you to set up rules for how much each inspector gets paid for each service. A simple report can be run anytime so you know how much to pay out every payroll.

We've broken this article down into sections to make it easier to follow! Each section will have step-by-step instructions as well as an overview video.

Click on each section below to see more information on that topic.

Enabling PaySplits

PaySplits is an Advanced-only feature so you will first need to sign up and enable Advanced. You can do so with a trial if you want to just check it out first before committing to always using the full feature set.

Watch this quick video to see how to enable PaySplits.

Quick guidde

  1. Click "Settings"

  2. Click "Advanced Tools"

  3. Click "Enable PaySplits"

  4. Once enabled, you'll see the "Set Up PaySplits" option on the right

  5. You'll be directed to your PaySplits screen
    ​

🌟 Pro-tip: You can add PaySplits to your Navigation Bar with these steps!
​

Settings 2024-01-19 at 4.57.07 PM

Now that you've enabled PaySplits, dive into the next section to see how to configure them!

Configuring PaySplits

Configuring your PaySplits is a big part of making sure your inspectors get paid. These configurations are where you'll determine how much of each inspection fee they receive. It can be a flat rate or a percentage. You can also set up a deduction for the company.
​

Check out our video here for a visual guide!
​

  1. Click on the button labeled $ SET UP PAY SPLITS to open the PaySplits configuration page.

    1. You can also add the PaySplits page to your Nav Bar customization here for easier access in the future or just go to PaySplits in your User Menu
      ​

  2. At the top of the screen, you will see a few buttons to navigate to other sections of Spectora that are relevant for configuring PaySplits
    ​


    ​

    1. PaySplits Options: Here you will find a couple of specific options for global settings for PaySplits:
      ​

      PaySplits 2024-01-23 at 12.42.48 PM


      ​

      1. Auto Assign PaySplit for Multiple Inspector Inspections. See the section below, Application of PaySplits in an Inspection, for more details on how this works.
        ​

      2. Only Show PaySplits on Inspection Details Screen for Admin Users which will prevent any non-admin users from seeing PaySplits information on the Inspection Details screens. Leaving this unchecked will allow non-admin users to see just their own PaySplit information on the screen. Admins will always be able to see and adjust the PaySplit information on this screen.
        ​

      3. Ignore Discounts When Calculating PaySplits. This allows your inspectors to receive their full pay regardless of what discounts the client may receive.
        ​

      4. Give 100% of distance-based additional fees to inspector(s). Any additional mileage or distance fees associated with the inspection (aka the inspector's travel costs) will be paid in full.
        ​

      5. More options to come!
        ​

    2. Services & Fees: These are likely defined already unless you are just starting with Spectora. If they are not you will need to set these up first.
      ​

    3. Service Limitations (only if you have enabled Service Limitations): Restrict what services specific inspectors can perform (specifically that they can be assigned to in Spectora). This is not required but if you do use the tool it will have an impact on your PaySplits configuration.
      ​

    4. Team: General inspector/staff configuration
      ​

    5. Pay Reports: Pay reports are generated based on the PaySplit calculations
      ​

  3. If it is your first time enabling and using PaySplits you will see the Set your default PaySplit banner and a Get Started button to do just that. Clicking that button will open the settings so you can set up your company-wide default setting for PaySplits.
    ​

  4. You will also see an example of how the PaySplit is being calculated in real-time as you adjust the values.
    ​


    ​

  5. You have options for:

    1. Percentage alone - Define a percentage of the total price of an inspection that the inspector(s) will receive.
      ​


      ​

    2. Percentage after a deduction - Define a percentage of what remains after a deduction of a flat rate or percentage (of the total) that the inspector(s) will receive.
      ​


      ​

    3. Flat Rate - Define a flat rate of the total price of an inspection that the inspector(s) will receive. Be careful with this one as it will be applied to all your services unless they are otherwise customized as defined below. It is possible to define a Flat Rate here that may be a higher dollar amount than a service price resulting in paying an inspector more than the service revenue. We highlight these scenarios in Red if you do this so they are easy to see and fix.
      ​
      ​

  6. If you have already set up PaySplits you will see what your company's default PaySplit is at the top and can change that in the Edit screen by clicking the pencil icon.


    ​

  7. You also have the option to set PaySplits more granularly by configuring the following:

    1. Split by Service
      ​

      1. Here you will see the details of the saved PaySplit configuration (default or custom) per service with individual line items for the add-ons under the primary service they are associated with.
        ​

      2. Clicking on the pencil icon on any of the service line items will open the edit screen and allow you to specifically define a PaySplit for that service.
        ​

      3. Once you save a custom PaySplit here you will see an option for Reset to Default which will simply revert the saved PaySplit configuration for that service back to the company-wide default configuration.
        ​

    2. Split by Inspector
      ​


      ​

      1. You can see at a glance how many Eligible Services each inspector has and how many Custom PaySplits (including the General Inspector PaySplit) have been defined for services for that specific inspector.
        ​

      2. Eligible Services here simply means the services that the inspector is allowed to perform as defined by the Service Limitations tool. If you don't use the Service Limitations tool in your company then the inspector is allowed to perform all services (add-ons counted individually).
        ​

      3. Clicking on the down arrow on the right will expand to see details and edit the inspector-specific PaySplits. You have the option to define the General PaySplits configuration per Inspector regardless of service and/or the PaySplit configuration per service for each individual inspector.

🌟 Pro-tip: Make sure to create a pay split for every single service and addon available!

Now let's move on to how PaySplits apply to inspections!
​

Application of PaySplits in an Inspection

Check out our first video here on the application of PaySplits
​

Next, we have a video on how PaySplits auto-assign to inspectors:

Once your PaySplits are set up, you're ready to have them apply to your inspections. PaySplits will automatically assign on solo-inspector inspections. With multi-inspector inspections, you can set the PaySplits to auto-assign.
​

  1. Auto Assign for multi-inspector inspections (video demo)
    ​

    1. This feature mentioned above is a selectable option in the PaySplits configuration page that allows for all inspectors on an inspection to automatically be assigned to all eligible services in an inspection.
      ​

    2. Remember "eligible services" are all services unless defined otherwise per inspector using Service Limitations.
      ​

    3. The PaySplits can still be manually overridden on the Inspection Details page by opening the Assign window and dragging/dropping the inspectors' names.
      ​

    4. Clicking on the refresh button in the PaySplits box on the Inspection Details page will reset any manual changes back to the Auto-Assigned setup.
      ​


      ​

    5. Example:

      • Inspector A has a service limitation restricting Sewer

      • Inspector B has a service limitation restricting Sewer

      • Inspector C has a service limitation restricting all services except for Sewer

      • Inspection scheduled with Residential, Radon, and Sewer services with all 3 inspectors assigned to the inspection

      • With Auto Assign turned on the initial PaySplit calculation will be configured like this:

        • Inspector A - Defined PaySplit calculations for Residential and Radon services divided by 2 (since there is another inspector also auto assigned to these two services)

        • Inspector B - Defined PaySplit calculations for Residential and Radon services divided by 2 (since there is another inspector also auto assigned to these two services)

        • Inspector C - Defined PaySplit calculation for Sewer service only
          ​

  2. Automatic update of the PaySplits calculation
    ​

    1. If you add or remove (Edit fees) a service in an inspection now the PaySplit calculation will automatically update with the new numbers.
      ​

    2. If you have Auto Assign turned on then adding or removing an inspector will also cause the PaySplit calculation to automatically update.
      ​

  3. Manually Assigning PaySplits
    ​

    1. If you prefer to manually adjust PaySplit assignments within the inspection you may do so by clicking on the Assign button to open the PaySplit Assignment window.
      ​


      ​

    2. You will see the inspector name(s) associated with each of the services in the inspection based on the currently assigned PaySplit but can adjust them by clicking to drag and drop the inspector name.
      ​


      ​

      1. Drag and drop a name out of the service and into the column on the left to remove an inspector PaySplit assignment from a given service.

      2. Drag and drop an inspector name from the column on the left to any service on the right to assign them.

Copying PaySplits

If you have a number of inspectors to set up and need for some inspectors to be configured a specific way while others need a different configuration you may want to use the Copy feature.

Check out this video here for the full walk-through:

  • Clicking on Copy will allow you to apply the customized PaySplits that are configured for an inspector to one or more other inspector(s).
    ​

  • Copying will only apply PaySplits for services that the receiving inspector is eligible for.
    ​

  • Copying will not overwrite any PaySplits for services that are not customized for the inspector that is being copied from.
    ​

  • Once copied you may still Reset to Default or manually make changes to PaySplits.

Admin Views

Team members with the "Company Admin" privilege (set in the Team page) will be able to see a box on each inspection that shows the full PaySplit breakdown for each inspector assigned to the inspection.

Teammates without admin access will only see their split on each inspection and will not be able to edit it.

Check out our video here for the full details:
​

⚠️ Important Considerations + Tips & Tricks

Important Considerations

  1. As there are several levels of granularity of PaySplits configuration it is important to understand the hierarchy of these configurations.

    1. Most granular: Service Specific under a Split by Inspector

    2. Less granular: Service Specific under Split by Service

    3. Less granular: General Inspector under Split by Inspector

    4. Least granular: Default PaySplit
      ​

  2. PaySplits will be applied to inspections going from most granular to least.

    1. Example:

      1. Service Specific PaySplit defined for under Inspector A AND a General Inspector PaySplit defined under Inspector A

      2. Inspection with that specific service where Inspector A is assigned to the service

      3. The PaySplit will calculate the split for that service for Inspector A according the Service Specific PaySplit defined for under Inspector A NOT the General Inspector PaySplit defined under Inspector A

Tips & Tricks

See our tips and tricks from Josh on our Product Team!
​

PaySplits 2024-01-19 at 3.44.02 PM

  1. You can override default splits per service or inspectors.
    ​

  2. Anytime you add a new service or inspectors, the default splits will automatically apply.
    ​

  3. Changing the 'default' only impacts splits that have not been customized.

If you have any questions or feedback, write into our chat bubble or email support@spectora.com!

Related Articles
Spectora Advanced: Service Limitations
Spectora Advanced: Service Areas
Spectora Advanced: Metrics
Spectora Advanced: Troubleshooting PaySplits
Spectora Advanced for Multi-Inspector Companies
Did this answer your question?